Showing posts with label half duplex transmission. Show all posts
Showing posts with label half duplex transmission. Show all posts

Tuesday, September 14, 2010

Basic Communication Modes of Operation

Simplex Operation
In simplex operation, a network cable or communications channel can only send information in one direction; it's a “one-way street”. This may seem counter-intuitive: what's the point of communications that only travel in one direction? In fact, there are at least two different places where simplex operation is encountered in modern networking. The first is when two distinct channels are used for communication: one transmits from A to B and the other from B to A. This is surprisingly common, even though not always obvious. Simplex operation is also used in special types of technologies, especially ones that are asymmetric. For example, one type of satellite Internet access sends data over the satellite only for downloads, while a regular dial-up modem is used for upload to the service provider. In this case, both the satellite link and the dial-up connection are operating in a simplex mode.


Half-Duplex Operation
Technologies that employ half-duplex operation are capable of sending information in both directions between two nodes, but only one direction or the other can be utilized at a time. This is a fairly common mode of operation when there is only a single network medium (cable, radio frequency and so forth) between devices.
While this term is often used to describe the behavior of a pair of devices, it can more generally refer to any number of connected devices that take turns transmitting. For example, in conventional Ethernet networks, any device can transmit, but only one may do so at a time. For this reason, regular (unswitched) Ethernet networks are often said to be “half-duplex”, even though it may seem strange to describe a LAN that way.


Full-Duplex Operation
In full-duplex operation, a connection between two devices is capable of sending data in both directions simultaneously. Full-duplex channels can be constructed either as a pair of simplex links (as described above) or using one channel designed to permit bidirectional simultaneous transmissions. A full-duplex link can only connect two devices, so many such links are required if multiple devices are to be connected together.