Showing posts with label ETHERNET. Show all posts
Showing posts with label ETHERNET. Show all posts

Wednesday, February 26, 2020

ETHERNET


Ethernet is the technology that is most commonly used in wired local area networks (LANs). A LAN is a network of computers and other electronic devices that covers a small area such as a room, office, or building. It is used in contrast to a wide area network (WAN), which spans much larger geographical areas. Ethernet is a network protocol that controls how data is transmitted over a LAN. Technically it is referred to as the IEEE 802.3 protocol. The protocol has evolved and improved over time to transfer data at the speed of a gigabit per second. 
How Ethernet works
The Institute of Electrical and Electronics Engineers Inc. (IEEE) specifies in the family of standards called IEEE 802.3 that the Ethernet protocol touches both Layer 1 -- the physical layer -- and Layer 2 -- the data link layer -- on the OSI network protocol model. Ethernet defines two units of transmission: packet and frame. The frame includes not just the payload of data being transmitted, but also:
  • the physical media access control (MAC) addresses of both the sender and receiver;
  • VLAN tagging and quality of service information;
  • Error correction information to detect transmission problems.

Advantages of using wired Ethernet network

• It is very reliable.
• Ethernet network makes use of firewalls for the security of the data.
• Data is transmitted and received at very high speed.
• It is very easy to use the wired network.

Disadvantages of using wired Ethernet network

• The wired Ethernet network is used only for short distances.
• The mobility is limited.
• Its maintenance is difficult.
• Ethernet cables, hubs, switches, routers increase the cost of installation.

Types of Ethernet network

The maximum data rate of the original Ethernet technology is 10 megabits per second (Mbps), but a second generation fast ethernet carries 100 Mbps, and the latest version called gigabit ethernet works at 1000 Mbps. Ethernet network can be classified into 3 types:

Fast Ethernet

This type of Ethernet can transfer data at a rate of 100 Mbps.  Fast Ethernet makes use of twisted pair cable or fiber optic cable for communication.
There are three types of fast Ethernet, which are as follows:
• 100BASE-TX
• 100BASE-FX
• 100BASE-T4

Gigabit Ethernet

This type of Ethernet network can transfer data at a rate of 1000 Mbps. Gigabit Ethernet also makes use of twisted pair cable or fiber optic cable. 48 bits used for addressing in Gigabit Ethernet. Nowadays gigabit Ethernet is very popular. The latest Gigabit Ethernet is a 10 Gigabit Ethernet, which can transfer data at a rate of 10 Gbps. Gigabit Ethernet was developed so that it can meet the needs of the user like faster communication network, faster transfer of data etc.


Thursday, December 12, 2013

ETHERNET


Ethernet is a physical and data link layer technology for local area networks (LANs). Ethernet was invented by engineer Robert Metcalfe. A local-area network (LAN) architecture developed by Xerox Corporation in cooperation with DEC and Intel in 1976. Ethernet uses a bus or star topology and supports data transfer rates of 10 Mbps. The Ethernet specification served as the basis for the IEEE 802.3 standard, which specifies the physical and lower software layers. Ethernet uses the CSMA/CD access method to handle simultaneous demands. It is one of the most widely implemented LAN standards.
A newer version of Ethernet, called 100Base-T (or Fast Ethernet), supports data transfer rates of 100 Mbps. And the newest version, Gigabit Ethernet supports data rates of 1 gigabit (1,000 megabits) per second.