The primary output device in a graphical system is the video monitor. The main element of a video monitor is the Cathode Ray Tube(CRT)The cathode-ray tube (CRT) is a vacuum tube that contains one or more electron guns and a phosphorescent screen and is used to display images. It modulates, accelerates, and deflects electron beam(s) onto the
screen to create the images. The images may represent electrical waveforms (oscilloscope), pictures (television, computer monitor), radar targets, or other phenomena.
The face is coated with a PHOSPHOR which PHOSPHORESCES (glows) when hit by the beam. This produces a spot of light on the centre of the face of the CRT. By varying the beam current, spot BRIGHTNESS can be controlled. Controlling the diameter of the beam controls FOCUS. Phosphors come in a range of colours.
On its way from the gun to the screen the beam passes between 2 sets of plates. They are called the X and Y plates (as in graphs). By applying voltages to these plates the beam can be deflected. This causes the spot to move from the centre of the screen to another position on the screen. The X plates plates deflect the spot horizontally, the Y plates vertically. Thus the spot can be deflected to any position on the screen. External deflection coils are often used instead of the internal deflection plates.
- The operation of CRT is very simple −
- The electron gun emits a beam of electrons
- The electron beam passes through focusing and deflection systems that direct it towards specified positions on the phosphor-coated screen.
- When the beam hits the screen, the phosphor emits a small spot of light at each position contacted by the electron beam.
- It redraws the picture by directing the electron beam back over the same screen points quickly.
The face is coated with a PHOSPHOR which PHOSPHORESCES (glows) when hit by the beam. This produces a spot of light on the centre of the face of the CRT. By varying the beam current, spot BRIGHTNESS can be controlled. Controlling the diameter of the beam controls FOCUS. Phosphors come in a range of colours.
On its way from the gun to the screen the beam passes between 2 sets of plates. They are called the X and Y plates (as in graphs). By applying voltages to these plates the beam can be deflected. This causes the spot to move from the centre of the screen to another position on the screen. The X plates plates deflect the spot horizontally, the Y plates vertically. Thus the spot can be deflected to any position on the screen. External deflection coils are often used instead of the internal deflection plates.
